Mainly designed for live performance, stadium, outdoor use, fixed
LA212 line array is a large-scale 3-way, tri-amped system, which
provides frequency ranges from 50Hz to 16kHz. The system consists
of 2X75 mm(voice coil)neodymium compression drivers, one 10"
neodymium MF driver and 2X12" neodymium LF drivers to achieve an
The MID and Low frequency adopts a couple of 12" cone LF driver.
Each unit's power handling is 400W and two units connect in series.
One 10" MF driver with high sensitivity is mounted at the rear of
the HF driver to make up a coaxial configuration. A MF phase plug
is mounted on the surface of the MF driver, which has excellently
improved the directivity and increased sensitivity. The HF section
utilizes 2x75mm(voice coil) neodymium complex film drivers coupled
with a 90 ° Exponential constant horn via plane-wave transducer to
make an coherent wave front. The HF section with 113 dB sensitivity
can make the loudspeaker generate 140 dB peak SPL output.
|Frequency Response:||50Hz-16KHz(± 3dB) 40Hz-18KHz(-10dB)|
|Nominal Coverage:||90° (H)7.5° (V)|
|Sensitivity (@1w/1m):||HF: 113dB SPL MF: 105 dB SPL LF: 100 dB SPL|
|Power Rating (AES): ||HF/MF/LF: 160W/350W/800W|
|Nominal Impedance:||HF/MF/LF: 16/16/12Ohm|
|Maximum SPL:||HF135/141 dB MF: 130/136 LF; 129/135 dB|
|Drivers: ||LF 2*12 (75mm Voice coil)neodymium woofer;
MF 1*10 (65mm voice coil)neodymium mid-range;
LF 2*3 neodymium compression driver
|Speaker Cables:|| 1-2+¦ LF 3-4+¦ MF 5-6+¦ HF|
|Materials:||18mm, 24mm birch multi-plywood|
|Finish:|| Black water paint|
|Grille:||Black epoxy mesh grille with acoustically reticulated cloth|
|Rigging:|| 0, 1, 2, 3, 4, 5, 7.5 degree adjustable|